Waterproofing your leather shoes (as well as some types of fabric shoes) is essential to surviving winter weather, since water can damage or completely ruin leather. All waterproofing solutions work similarly to create a thin barrier on the surface of your leather that cannot be permeated by water.
Before you get started the waterproofing process, take a close look at your shoes and determine what type of leather and other materials it is made of. Check the shoe box for any special cleaning instructions that you will need to keep in mind. Then select a waterproofing product that is made for your type of leather.
For waterproofing shoes, best site here you may select either a spray or a semi-solid wax product. Sprays are better to use, but may well not be able to provide a good thick protecting coat. On the other hand, you should not use a spray (which usually contains silicone) on thin, fragile leathers. The manufacturer of this leather may recommend a simple semi-solid product for water proof shoes.
Before you commence waterproofing, do a "spot test" on a small, hard-to-see area on your shoes. A good spot is somewhere inside the shoes, such as on the underside of the tongue. If you notice any color or texture changes, or any damage, stop and do not use the product. Contact the maker of your shoes to learn how to proceed.
If all moves well, you can get started waterproofing leather. Some waxy products contain a brush, and some are rub-on. When utilizing a rub-on product, get an easy, soft, cloth. Study the directions first - most likely, they are going to explain to you to rub in slow circular motions and apply more than one coat for waterproofing shoes.
If you use a brush, the process is much the same, other than that you can make slow circular motions with the brush, and try to apply a bit of pressure so that the brush can get deep into splits. However, be sure you are utilizing a soft brush specially made for this purpose, otherwise you could scratch the shoes. Specialists usually recommend that a brush be used for fabric waterproofing, as well.
Speaking of cracks, whether by using a fabric or brush, you will want to spend extra attention on all seams, cracks, raised areas, and any imperfections in the leather. Slather of course on these areas so that it can really sink in, and rub copiously. Replicate up to three times if necessary to water-resistant these important areas.